/home/kueuepay/public_html/vendor/phpoffice/phpspreadsheet/src/PhpSpreadsheet/Shared/OLERead.php
<?php

namespace PhpOffice\PhpSpreadsheet\Shared;

use PhpOffice\PhpSpreadsheet\Reader\Exception as ReaderException;

class OLERead
{
    /** @var string */
    private $data = '';

    // Size of a sector = 512 bytes
    const BIG_BLOCK_SIZE = 0x200;

    // Size of a short sector = 64 bytes
    const SMALL_BLOCK_SIZE = 0x40;

    // Size of a directory entry always = 128 bytes
    const PROPERTY_STORAGE_BLOCK_SIZE = 0x80;

    // Minimum size of a standard stream = 4096 bytes, streams smaller than this are stored as short streams
    const SMALL_BLOCK_THRESHOLD = 0x1000;

    // header offsets
    const NUM_BIG_BLOCK_DEPOT_BLOCKS_POS = 0x2c;
    const ROOT_START_BLOCK_POS = 0x30;
    const SMALL_BLOCK_DEPOT_BLOCK_POS = 0x3c;
    const EXTENSION_BLOCK_POS = 0x44;
    const NUM_EXTENSION_BLOCK_POS = 0x48;
    const BIG_BLOCK_DEPOT_BLOCKS_POS = 0x4c;

    // property storage offsets (directory offsets)
    const SIZE_OF_NAME_POS = 0x40;
    const TYPE_POS = 0x42;
    const START_BLOCK_POS = 0x74;
    const SIZE_POS = 0x78;

    /** @var int */
    public $wrkbook;

    /** @var int */
    public $summaryInformation;

    /** @var int */
    public $documentSummaryInformation;

    /**
     * @var int
     */
    private $numBigBlockDepotBlocks;

    /**
     * @var int
     */
    private $rootStartBlock;

    /**
     * @var int
     */
    private $sbdStartBlock;

    /**
     * @var int
     */
    private $extensionBlock;

    /**
     * @var int
     */
    private $numExtensionBlocks;

    /**
     * @var string
     */
    private $bigBlockChain;

    /**
     * @var string
     */
    private $smallBlockChain;

    /**
     * @var string
     */
    private $entry;

    /**
     * @var int
     */
    private $rootentry;

    /**
     * @var array
     */
    private $props = [];

    /**
     * Read the file.
     */
    public function read(string $filename): void
    {
        File::assertFile($filename);

        // Get the file identifier
        // Don't bother reading the whole file until we know it's a valid OLE file
        $this->data = (string) file_get_contents($filename, false, null, 0, 8);

        // Check OLE identifier
        $identifierOle = pack('CCCCCCCC', 0xd0, 0xcf, 0x11, 0xe0, 0xa1, 0xb1, 0x1a, 0xe1);
        if ($this->data != $identifierOle) {
            throw new ReaderException('The filename ' . $filename . ' is not recognised as an OLE file');
        }

        // Get the file data
        $this->data = (string) file_get_contents($filename);

        // Total number of sectors used for the SAT
        $this->numBigBlockDepotBlocks = self::getInt4d($this->data, self::NUM_BIG_BLOCK_DEPOT_BLOCKS_POS);

        // SecID of the first sector of the directory stream
        $this->rootStartBlock = self::getInt4d($this->data, self::ROOT_START_BLOCK_POS);

        // SecID of the first sector of the SSAT (or -2 if not extant)
        $this->sbdStartBlock = self::getInt4d($this->data, self::SMALL_BLOCK_DEPOT_BLOCK_POS);

        // SecID of the first sector of the MSAT (or -2 if no additional sectors are used)
        $this->extensionBlock = self::getInt4d($this->data, self::EXTENSION_BLOCK_POS);

        // Total number of sectors used by MSAT
        $this->numExtensionBlocks = self::getInt4d($this->data, self::NUM_EXTENSION_BLOCK_POS);

        $bigBlockDepotBlocks = [];
        $pos = self::BIG_BLOCK_DEPOT_BLOCKS_POS;

        $bbdBlocks = $this->numBigBlockDepotBlocks;

        if ($this->numExtensionBlocks !== 0) {
            $bbdBlocks = (self::BIG_BLOCK_SIZE - self::BIG_BLOCK_DEPOT_BLOCKS_POS) / 4;
        }

        for ($i = 0; $i < $bbdBlocks; ++$i) {
            $bigBlockDepotBlocks[$i] = self::getInt4d($this->data, $pos);
            $pos += 4;
        }

        for ($j = 0; $j < $this->numExtensionBlocks; ++$j) {
            $pos = ($this->extensionBlock + 1) * self::BIG_BLOCK_SIZE;
            $blocksToRead = min($this->numBigBlockDepotBlocks - $bbdBlocks, self::BIG_BLOCK_SIZE / 4 - 1);

            for ($i = $bbdBlocks; $i < $bbdBlocks + $blocksToRead; ++$i) {
                $bigBlockDepotBlocks[$i] = self::getInt4d($this->data, $pos);
                $pos += 4;
            }

            $bbdBlocks += $blocksToRead;
            if ($bbdBlocks < $this->numBigBlockDepotBlocks) {
                $this->extensionBlock = self::getInt4d($this->data, $pos);
            }
        }

        $pos = 0;
        $this->bigBlockChain = '';
        $bbs = self::BIG_BLOCK_SIZE / 4;
        for ($i = 0; $i < $this->numBigBlockDepotBlocks; ++$i) {
            $pos = ($bigBlockDepotBlocks[$i] + 1) * self::BIG_BLOCK_SIZE;

            $this->bigBlockChain .= substr($this->data, $pos, 4 * $bbs);
            $pos += 4 * $bbs;
        }

        $sbdBlock = $this->sbdStartBlock;
        $this->smallBlockChain = '';
        while ($sbdBlock != -2) {
            $pos = ($sbdBlock + 1) * self::BIG_BLOCK_SIZE;

            $this->smallBlockChain .= substr($this->data, $pos, 4 * $bbs);
            $pos += 4 * $bbs;

            $sbdBlock = self::getInt4d($this->bigBlockChain, $sbdBlock * 4);
        }

        // read the directory stream
        $block = $this->rootStartBlock;
        $this->entry = $this->readData($block);

        $this->readPropertySets();
    }

    /**
     * Extract binary stream data.
     *
     * @param ?int $stream
     *
     * @return null|string
     */
    public function getStream($stream)
    {
        if ($stream === null) {
            return null;
        }

        $streamData = '';

        if ($this->props[$stream]['size'] < self::SMALL_BLOCK_THRESHOLD) {
            $rootdata = $this->readData($this->props[$this->rootentry]['startBlock']);

            $block = $this->props[$stream]['startBlock'];

            while ($block != -2) {
                $pos = $block * self::SMALL_BLOCK_SIZE;
                $streamData .= substr($rootdata, $pos, self::SMALL_BLOCK_SIZE);

                $block = self::getInt4d($this->smallBlockChain, $block * 4);
            }

            return $streamData;
        }
        $numBlocks = $this->props[$stream]['size'] / self::BIG_BLOCK_SIZE;
        if ($this->props[$stream]['size'] % self::BIG_BLOCK_SIZE != 0) {
            ++$numBlocks;
        }

        if ($numBlocks == 0) {
            return '';
        }

        $block = $this->props[$stream]['startBlock'];

        while ($block != -2) {
            $pos = ($block + 1) * self::BIG_BLOCK_SIZE;
            $streamData .= substr($this->data, $pos, self::BIG_BLOCK_SIZE);
            $block = self::getInt4d($this->bigBlockChain, $block * 4);
        }

        return $streamData;
    }

    /**
     * Read a standard stream (by joining sectors using information from SAT).
     *
     * @param int $block Sector ID where the stream starts
     *
     * @return string Data for standard stream
     */
    private function readData($block)
    {
        $data = '';

        while ($block != -2) {
            $pos = ($block + 1) * self::BIG_BLOCK_SIZE;
            $data .= substr($this->data, $pos, self::BIG_BLOCK_SIZE);
            $block = self::getInt4d($this->bigBlockChain, $block * 4);
        }

        return $data;
    }

    /**
     * Read entries in the directory stream.
     */
    private function readPropertySets(): void
    {
        $offset = 0;

        // loop through entires, each entry is 128 bytes
        $entryLen = strlen($this->entry);
        while ($offset < $entryLen) {
            // entry data (128 bytes)
            $d = substr($this->entry, $offset, self::PROPERTY_STORAGE_BLOCK_SIZE);

            // size in bytes of name
            $nameSize = ord($d[self::SIZE_OF_NAME_POS]) | (ord($d[self::SIZE_OF_NAME_POS + 1]) << 8);

            // type of entry
            $type = ord($d[self::TYPE_POS]);

            // sectorID of first sector or short sector, if this entry refers to a stream (the case with workbook)
            // sectorID of first sector of the short-stream container stream, if this entry is root entry
            $startBlock = self::getInt4d($d, self::START_BLOCK_POS);

            $size = self::getInt4d($d, self::SIZE_POS);

            $name = str_replace("\x00", '', substr($d, 0, $nameSize));

            $this->props[] = [
                'name' => $name,
                'type' => $type,
                'startBlock' => $startBlock,
                'size' => $size,
            ];

            // tmp helper to simplify checks
            $upName = strtoupper($name);

            // Workbook directory entry (BIFF5 uses Book, BIFF8 uses Workbook)
            if (($upName === 'WORKBOOK') || ($upName === 'BOOK')) {
                $this->wrkbook = count($this->props) - 1;
            } elseif ($upName === 'ROOT ENTRY' || $upName === 'R') {
                // Root entry
                $this->rootentry = count($this->props) - 1;
            }

            // Summary information
            if ($name == chr(5) . 'SummaryInformation') {
                $this->summaryInformation = count($this->props) - 1;
            }

            // Additional Document Summary information
            if ($name == chr(5) . 'DocumentSummaryInformation') {
                $this->documentSummaryInformation = count($this->props) - 1;
            }

            $offset += self::PROPERTY_STORAGE_BLOCK_SIZE;
        }
    }

    /**
     * Read 4 bytes of data at specified position.
     *
     * @param string $data
     * @param int $pos
     *
     * @return int
     */
    private static function getInt4d($data, $pos)
    {
        if ($pos < 0) {
            // Invalid position
            throw new ReaderException('Parameter pos=' . $pos . ' is invalid.');
        }

        $len = strlen($data);
        if ($len < $pos + 4) {
            $data .= str_repeat("\0", $pos + 4 - $len);
        }

        // FIX: represent numbers correctly on 64-bit system
        // http://sourceforge.net/tracker/index.php?func=detail&aid=1487372&group_id=99160&atid=623334
        // Changed by Andreas Rehm 2006 to ensure correct result of the <<24 block on 32 and 64bit systems
        $_or_24 = ord($data[$pos + 3]);
        if ($_or_24 >= 128) {
            // negative number
            $_ord_24 = -abs((256 - $_or_24) << 24);
        } else {
            $_ord_24 = ($_or_24 & 127) << 24;
        }

        return ord($data[$pos]) | (ord($data[$pos + 1]) << 8) | (ord($data[$pos + 2]) << 16) | $_ord_24;
    }
}
Path: home/kueuepay/public_html/vendor/phpoffice/phpspreadsheet/src/PhpSpreadsheet/Shared
About
top

About Section

About NFC Pay: Our Story and Mission

NFC Pay was founded with a vision to transform the way people handle transactions. Our journey is defined by a commitment to innovation, security, and convenience. We strive to deliver seamless, user-friendly payment solutions that make everyday transactions effortless and secure. Our mission is to empower you to pay with ease and confidence, anytime, anywhere.

  • Simplifying Payments, One Tap at a Time.
  • Reinventing Your Wallet for Modern Convenience.
  • Smart Payments for a Effortless Lifestyle.
  • Experience the Ease of Tap and Pay.
  • Innovative Solutions for Your Daily Transactions.

FAQ Section

Frequently Asked Questions About NFC Pay

Here are answers to some common questions about NFC Pay. We aim to provide clear and concise information to help you understand how our platform works and how it can benefit you. If you have any further inquiries, please don’t hesitate to contact our support team.

faq-img

How do I register for NFC Pay?

Download the app and sign up using your email or phone number, then complete the verification process.

Is my payment information secure?

Yes, we use advanced encryption and security protocols to protect your payment details.

Can I add multiple cards to my NFC Pay wallet?

Absolutely, you can link multiple debit or credit cards to your wallet.

How do I transfer money to another user?

Go to the transfer section, select the recipient, enter the amount, and authorize the transfer.

What should I do if I forget my PIN?

Use the “Forgot PIN” feature in the app to reset it following the provided instructions.

How can I activate my merchant account?

Sign up for a merchant account through the app and follow the setup instructions to start accepting payments.

Can I track my payment status?

Yes, you can view and track your payment status in the account dashboard

In the digital age, privacy concerns have become increasingly paramount, prompting the European Union to enact the General Data Protection Regulation (GDPR) in 2018. Among its many provisions, GDPR sets strict guidelines for the collection and processing of personal data, including the use of cookies on websites. Privacy Policy